NETGEAR WAC505 - Technical Specifications

Technical Specifications
The following table shows the technical specifications of the access point.
Table 3. Access point specifications
DescriptionFeature
2.4 GHz band: 802.11ng, 801.11bg, and 802.11b
5 GHz band: 802.11ac, 802.11na, and 802.11a
Supports 2.4 GHz and 5 GHz concurrent operation
Supported WiFi radio
frequencies and WiFi modes
About 1.2 Mbps simultaneous throughput (300 Mbps on the 2.4 GHz band and 867
Mbps on the 5 GHz band)
Note:Throughput can vary. Network conditions and environmental factors, including
volume of network traffic, building materials and construction, and network overhead,
affect the data throughput rate.
Maximum theoretical
throughput
Maximum number of 2.4 GHz WiFi clients: 50
Maximum number of 5 GHz WiFi clients: 50
Maximum number of
supported clients
IEEE 802.11ac Wave 2 standard
WiFi Multimedia Prioritization (WMM)
Wireless distribution system (WDS)
WiFi standards
WPA2-PSK, WPA and WPA2 (mixed mode), and WPA2 Enterprise802.11 security
2.4 GHz band:
• US and Canada: 2.412–2.462 GHz
• Europe: 2.412–2.472 GHz
• Australia: 2.412–2.472 GHz
• Japan: 2.412–2.472 GHz
5 GHz band:
• US and Canada: 5.18–5.24 + 5.745–5.825 GHz
• Europe: 5.18–5.24 GHz
• Australia: 5.18–5.24 + 5.745–5.825 GHz
• Japan: 5.18–5.24 GHz
Operating frequency range
IEEE 802.3af and IEEE 802.3at
PoE might be considered a network environment 0 per IEC
TR 62101, and thus the interconnected ITE circuits might be
considered safety extra low voltage (SELV).
Note
Power over Ethernet
Factory Default Settings and Technical Specifications
139
Insight Managed Smart Cloud Wireless Access Point WAC505 User Manual