NETGEAR WAC505 User Manual

4
Manage the Advanced WiFi and Radio
Features
This chapter describes how you can manage the advanced WiFi and radio features of the access point. For
information about the basic WiFi and radio settings, see Manage the Basic WiFi and Radio Features on page
29.
If you want to change the settings of the access point’s WiFi network, use a wired connection to
avoid being disconnected when the new WiFi settings take effect.
Tip
The chapter includes the following sections:
• Manage the Advanced Radio Features
• Set Up a WiFi Bridge Between Access Points
58

NETGEAR WAC505 Specifications

General

2.4 GHz	Yes
Networking standards	IEEE 802.11i, IEEE 802.3af, IEEE 802.3at
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Maximum data transfer rate	1167 Mbit/s
Maximum data transfer rate (5 GHz)	867 Mbit/s
Maximum data transfer rate (2.4 GHz)	300 Mbit/s
Output current	2.5 A
Output voltage	12 V
USB 2.0 ports quantity	0
Ethernet LAN (RJ-45) ports	1
Internal	No
Placement	Ceiling, Wall
Product color	White
Security algorithms	802.1x RADIUS, EAP, EAP-TLS, PEAP, TTLS, WPA, WPA-PSK, WPA2, WPA2-PSK
Service Set Identifier (SSID) features	SSID broadcast on/off
Antenna gain level (max)	4 dBi

Weight and Dimensions

Depth	165 mm
Width	175 mm
Height	35 mm
Weight	256 g