NETGEAR WAC505 - Manage the Local Area Network and IP Settings

6
Manage the Local Area Network and IP
Settings
This chapter describes how you can manage the local area network (LAN) and IP settings of the access point.
The chapter includes the following sections:
• Disable the DHCP Client and Specify a Fixed IP Address
• Enable the DHCP Client
• Set the 802.1Q VLAN and Management VLAN
• Enable or Disable Spanning Tree Protocol
• Enable or Disable Network Integrity Check
• Enable or Disable IGMP Snooping
• Enable or Disable Ethernet LLDP
• Enable or Disable UPnP
82