If the path is functioning correctly, replies as described in Test the LAN Path to Your Access Point on page
133 display. If you do not receive replies, do the following:
• Check to see that your computer lists the IP address of the router to which the access point is connected
as the default router. If the IP configuration of your computer is assigned by DHCP, this information is
not visible in your computer’s Network Control Panel.
• Check to see that the network address of your computer (the portion of the IP address specified by the
netmask) is different from the network address of the remote device.
Diagnostics and Troubleshooting
134
Insight Managed Smart Cloud Wireless Access Point WAC505 User Manual
To Next Page
Loading...
