NETGEAR WAC505 - Page 137

Table 2. Access point factory default settings (Continued)
Default SettingFeature
Auto.The available channels depend on the region.RF channel
WLAN settings for an individual WiFi network (SSID or VAP)
Both the 2.4 GHz radio and the 5 GHz radio are enabled.WiFi communication
DisabledClient separation
EnabledBroadcast SSID
Disabled802.11K (RRM)
DisabledBand steering
–100 dBmRSSI threshold
1VLAN ID (for WiFi clients)
WPA2-PSKNetwork authentication
AESData encryption
sharedsecretPassphrase
None assignedMAC ACL
NoneRate limit
NoneCaptive portal
Basic WiFi settings for all WiFi networks (SSIDs or VAPs)
Both the 2.4 GHz radio and the 5 GHz radio are enabled.Radios
2.4 GHz radio: 11ng mode, which also supports 11b and 11bg
5 GHz radio: 11ac mode, which also support 11a and 11na
WiFi mode
BestMCS index / data rate
Dynamic 20/40 MHz for the 2.4 GHz radio
Dynamic 20/40/80 MHz for the 5 GHz radio
Channel width
Maximum (100%)Output power
AutoGuard interval
AutoChannel
NoneWiFi schedule
EnabledWi-Fi Multimedia (WMM)
Factory Default Settings and Technical Specifications
137
Insight Managed Smart Cloud Wireless Access Point WAC505 User Manual