EasyManua.ls Logo

NETGEAR WAC505 - Page 60

NETGEAR WAC505
141 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4. Select Management > Configuration > Wireless > Advanced.
5. Configure the settings as described in the following table.
The descriptions in the table apply to both radios. Except for the MU-MIMO feature, you can specify the
radio settings for the 2.4 GHz and 5 GHz radios individually.
DescriptionSetting
Enter the maximum number of WiFi clients that can simultaneously associate with the
radio. The range is from 1 to 50.The default is 50 WiFi clients.
Max. Wireless Clients
Enter the Request to Send (RTS) threshold. The range is from 256 to 2346. The default
is 2346.
If the packet size is equal to or less than the RTS threshold, the radio uses the Carrier
Sense Multiple Access with Collision Detection (CSMA/CD) mechanism and the data
frame is transmitted immediately after the silence period. If the packet size is larger than
the RTS threshold, the system uses the CSMA with Collision Avoidance (CSMA/CA)
mechanism. In this situation, the transmitting device sends the RTS packet to the receiving
device and waits for the receiving device to return a Clear to Send (CTS) packet before
sending the actual packet data.
RTS Threshold
(256-2346)
Enter an interval between 100 ms and 300 ms for each beacon transmission, which
allows the radio to synchronize the WiFi network.The default is 100 ms.
Beacon Interval
(100-300)
Multicast and broadcast rate limiting is enabled by default to improve the overall network
performance by limiting the number of packets that are transmitted across the network.
By default, the setting is 50 (the maximum possible value), which specifies a maximum
rate limit of 50 packets per second. To change the setting, move the slider. To disable
multicast and broadcast rate limiting, clear the small check box.
Broadcast/Multicast
Rate Limiting
From the menu, select the multicast traffic transmission rate for the radio.The default is
54 Mbps (the maximum possible value).You can also select Auto and let the access
point automatically adjust the multicast traffic transmission rate.
Fixed Multicast Rate
Manage the Advanced WiFi and Radio Features
60
Insight Managed Smart Cloud Wireless Access Point WAC505 User Manual

Table of Contents

Other manuals for NETGEAR WAC505

Related product manuals