A login window opens.
3. Enter the access point user name and password.
The default user name is admin. The password is the one that you specified the first time that you
logged in.The user name and password are case-sensitive.
The Dashboard page displays.
4. Select Management > Configuration > System > Advanced > UPnP.
The UPnP page displays.
5. Select one of the following radio buttons:
• Enable. UPnP is enabled.This is the default setting.
• Disable. UPnP is disabled.
6. Click the Apply button.
Your settings are saved.
Manage the Local Area Network and IP Settings
90
Insight Managed Smart Cloud Wireless Access Point WAC505 User Manual
To Next Page
Loading...
