97
S
MARTNA™ 10G NETWORK ACCESS (SMARTNA-X)
COMMAND LINE INTERFACE REFERENCE |
DRAFT
SET USER PASSWORD
Use the set user password command to change the login password for the specified user when using local
authentication. If your system has been set up to authenticate users via an external authentication server, you will
need to manage user passwords on the external server instead.
Command form set user username password password
Example Change user1 password to user1pass:
username Specifies the user account name to change. User names are case-sensitive.
password Specifies the new password for the specified user. Passwords are case-sensitive.
CONTROLLER>set user user1 password user1pass
To Next Page
Loading...
