Network Critical SmartNA-X - Reate Tacacs Accserver

110
S
MARTNA™ 10G NETWORK ACCESS (SMARTNA-X)
COMMAND LINE INTERFACE REFERENCE |
DRAFT
CREATE TACACS ACCSERVER
Use the create tacacs accserver command to add a TACACS+ accounting server and implicitly enable SmartNA-
X audit logging. Note that local audit logging is not available on SmartNA-X.
Command form create tacacs accserver <IP-addr> [password]
Example Add a TACACS+ accounting server with the following properties:
• IP address: 192.168.10.25
• Password: qwaszx
IP-addr Specifies the network IP address of the TACACS+ accounting server.
password (Optional) Specifies the password/shared-secret required to access the accounting
server. Passwords are case-sensitive.
Warning: If no password is specified, the shared-secret will be set as an empty string
(“”).
CONTROLLER>create tacacs accserver 192.168.10.25 qwaszx