Network Critical SmartNA-X - Elete Tacacs Authserver

107
S
MARTNA™ 10G NETWORK ACCESS (SMARTNA-X)
COMMAND LINE INTERFACE REFERENCE |
DRAFT
DELETE TACACS AUTHSERVER
Use the delete tacacs authserver command to remove access to a TACACS+ authentication server. Note that users
will not be able to access SmartNA-X unless local authentication is enabled (set authentication local) or another
authentication server is added (create tacacs authserver).
Command form delete tacacs authserver IP-addr
Example Delete TACACS+ authentication server 192.168.10.24:
IP-addr Specifies the network address of the TACACS+ authentication server.
CONTROLLER>delete tacacs authserver 192.168.10.24