Network Critical SmartNA-X - Commands for Managing Network Configuration

83
S
MARTNA™ 10G NETWORK ACCESS (SMARTNA-X)
COMMAND LINE INTERFACE REFERENCE |
DRAFT
Commands for managing network configuration
The CLI supports the following commands for configuring network settings:
• CREATE NTP, page 84
• DELETE NTP, page 85
• SHOW IPV4, page 86
• SET IPV4 STATIC, page 87
• SET IPV4 GATEWAY, page 88
• SET IPV4 DNS, page 89
• SET IPV4 DHCP, page 90
• SHOW IPV6, page 91
• SET IPV6 STATIC, page 92
• SET IPV6 GATEWAY, page 93