Network Critical SmartNA-X - TAP Module Health Tab

203
S
MARTNA™ 10G NETWORK ACCESS (SMARTNA-X)
WEB USER-INTERFACE REFERENCE | TAP MODULE HEALTH TAB
DRAFT
TAP module health tab
The TAP module Health tab is available after clicking on a TAP module. It provides access to the module
properties shown in Table B-13.
Figure B-8 TAP module Health tab
Table B-13 TAP module health tab options
Option Description
Firmware built System firmware inception
Card uptime Time since last reboot/system startup
Firmware revision System firmware revision number
Hardware revision Hardware revision number
Model number System model number
Serial number SmartNA-X devices serial number
Temperature Current system temperature
Temperature threshold
(
º
C)
Sets the upper temperature threshold (in Celsius) for the SNMP system to send over-temperature
Notifications to SNMP clients set up to receive temperature notifications. The default threshold is set at
60
º
C.