Network Critical SmartNA-X - Obtaining Smartna MIB Files

224
S
MARTNA™ 10G NETWORK ACCESS (SMARTNA-X)
SUPPORTED MIBS | OBTAINING SMARTNA MIB FILES
DRAFT
Table G-1 lists the standard MIBs supported by SmartNA-X:
Obtaining SmartNA MIB Files
SmartNA MIB files can be downloaded from the Network Critical, at the following web address:
http://www.networkcritical.com/Support/SmartNA-Tools
MIB Description
IANAifType-MIB Interface types referenced in IF-MIB.
IF-MIB Interface Info and notifications (linkUP and linkDown)
NOTIFICATION-LOG-MIB Partial read-only support of objects in this MIB.
The following restrictions apply to objects within the NlmLogVariableTable table:
•nlmLogVariableID (supported)
• nlmLogVariableValueType (supported)
• nlmLogVariableTimeTicksVal (supported for 1st entry only)
• nlmLogVariableInteger32Val (not supported)
• nlmLogVariableOctetStringVal (not supported)
• nlmLogVariableOidVal (not supported)
The following restrictions apply to objects within the NlmLogTable table:
• nlmLogTime TimeStamp (supported)
• nlmLogDateAndTime DateAndTime (supported)
• nlmLogEngineID SnmpEngineID (not supported)
• nlmLogEngineTAddress TAddress (not supported)
• nlmLogEngineTDomain TDomain (not supported)
• nlmLogContextEngineID SnmpEngineID (not supported)
• nlmLogContextName SnmpAdminString (not supported)
• nlmLogNotificationID (accessible by column only)
SNMP-FRAMEWORK-MIB Read-only support of objects in this MIB.
SNMP-NOTIFICATION-MIB Read-only support of objects in this MIB.
SNMP-TARGET-MIB Read-only support of objects in this MIB.
SNMP-USER-BASED-SM-MIB Read-only support of objects in this MIB.
SNMP-VIEW-BASED-ACM-MIB Read-only support of objects in this MIB.
SNMPv2-CONF-MIB Conformance definitions referenced in SNMPv2-MIB.
SNMPv2-MIB System info and snmp notifications (coldStart, warmStart and authenticationFailure)
Table G-2 Standard MIBs supported