69
DRAFT
APPENDIX A
A –
COMMAND LINE INTERFACE REFERENCE
This appendix describes the command line interface (CLI) commands that are available for SmartNA-X. It
includes the following sections:
• Basic commands, page 70
• Commands for managing contact and location details, page 79
• Commands for managing network configuration, page 83
• Commands for managing users, page 94
• Commands for managing authentication and accounting, page 100
• Commands for managing TAP modules, page 113
• Commands for managing TAP ports, page 114
• Commands for managing port maps and packet filters, page 133
• Commands for managing SNMP, page 152
To Next Page
Loading...
