35
DRAFT
CHAPTER 5
5 –
USING THE WEB USER INTERFACE
This chapter provides information on managing SmartNA-X via the integrated web user-interface (UI). The web
UI supports a full set of administrative, user and audit options and is available to all SmartNA-X users, although
some options may be disabled if you don’t have the required access privileges. It contains the following sections:
• Accessing the web UI, page 35
• Selecting options in the system diagram, page 36
Accessing the web UI
To access the web UI, you will need:
• IP address for SmartNA-X and a connection to the SmartNA-X Management/Network port
• a SmartNA-X user, admin or audit account
• Internet Explorer 8.0+, Firefox, Chrome, Safari
with Java™ 1.5 (or later) plugin enabled
NOTE
: The web UI (and CLI) support single user access only. Make sure there are no other users logged in before
attempting to access the web UI/CLI interface.
To Next Page
Loading...
