EDH0162En1040 – 06/99 1.8
MM4005 Introduction
A more common setup is shown in Fig. 1.2. The MM4005 drives multiple
stages and is controlled by a remote computer.
Fig. 1.2 — A common controller setup.
A more complex configuration, shown in Fig. 1.3 , could have up to 4
motion devices, digital and analog I/O signaling for motion synchronization,
remote safety “motor off” switches and be part of a larger multi-axis sys-
tem, controlled by a remote computer.
Fig. 1.3 — A more complex controller configuration.
To explore all capabilities of the MM4005 controller and identify the system
configuration that best fits your application, you will have to read most of
this manual or contact our applications support group for advice.
To other
Motion Controller
Remote Motor
OFF
Digital/Analog
I/O’s
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
