8.33 EDH0162En1040 – 06/99
MM4005 4-Axis Motion Controller/Driver
G — Factory Service
G.1 Introduction
This section contains information regarding factory service for the
MM4005. The MM4005 contains no user-serviceable parts. The user should
not attempt any maintenance or service of this instrument and/or acces-
sories beyond the procedures outlined in the Troubleshooting Guide,
Appendix E. Any problem that cannot be resolved should be referred to
Newport Corporation or your Newport representative for assistance.
G.2 Obtaining Service
To obtain information about factory service, contact Newport Corporation
or your Newport representative. Please have the following information
available:
1 Instrument model number (MM4005).
2 Instrument serial number.
3 Firmware version number.
4 Description of the problem.
If the instrument is to be returned for repair, you will be given a Return
Authorization Number, which you should refer to in your shipping docu-
ments. Please fill out the service form on the next page and return the com-
pleted form with your system.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
