EDH0162En1040 – 06/99 3.176
MM4005 XN — Read number of acquisitions
Usage IMM PGM MIP
Syntax XN
Parameters
None.
Description This command reads the current number of trace acquisitions. During a
trace mode initiated by the TM command, the number of stored samples
can be read to monitor the progress of the acquisition process.
Returns XNnn
nn
— Nnumber of acquired samples.
Errors S — Communication time-out.
Rel. Commands None.
Example
SP 0.005 | Set trace sample period to 5 ms.
2TM1000 | Enable trace mode for axis #2 and acquire 1000 samples.
2PR0.2 |
Start a relative motion on axis #2 and the acquisition process.
XN | Read the number of samples acquired.
XN157 | Controller reports 157 trace samples acquired.
XN | Read the number of samples acquired.
XN342
| Controller reports 342 trace samples acquired.
2WS, XN | Wait for stop and read the number of samples acquired.
XN1000
| Controller reports 1000 trace samples acquired.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
