8.29 EDH0162En1040 – 06/99
MM4005 Appendix E — Troubleshooting Guide
NOTE
Many other type of problems are detected by the controller and reported
on the display and/or in the error register. Consult appendix A for a com-
plete list and description.
Problem
Cause Corrective Action
No remote commu-
nication
Wrong line
Make sure that the computer
and the controller use the same
line terminator.
Wrong commu-
nication port
Verify that the controller is set
to communication on the left
port RS-232-C or IEEE-488.
Wrong commu-
nication para-
meters
Verify that all communication
parameters match between the
computer and the controller.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
