Newport MM4005 - Page 60

2.23 EDH0162En1040 – 06/99
MM4005 Local Mode
2.2.2.14 Manual Speed
This parameter defines the high velocity of the manual jog mode (using
front panel or joystick). The default value is 50% of the Maximum Speed,
but you can change it to suit your needs. The slow speed manual jog is one
tenth of the high speed.
To change the manual jog high speed, press the key when the
Manual Speed parameter is displayed. Use the numeric keypad to enter a
new value. Press to accept the new setting and return to the previ-
ous menu.
Press the key to advance to the next parameter.
→→→→→→
→→→
MH — Set manual velocity.
DM — Read manual velocity.
2.2.2.15 HOME Speed
This parameter sets the value of the home search high velocity portion. It
is recommended that this value not be altered.
If you are setting up a new motion device that has no default parameters,
press the key to set the HOME speed. Use the numeric keypad to
enter a value that is equal to 50% of the Maximum Speed. Press to
accept the setting and return to the previous menu.
Press the key to advance to the next parameter.
→→→→→→
→→→
OH
— Set home search velocity.
DO — Read home search velocity.
QUITYESQUITQUIT
VALID
1
4
7
2
5
8
3
6
9
.
-
0
Axis 1
Axis 2
Axis 3
Axis 4
JOG
MODIFY
UP
MODIFYAxis Setup
1
4
7
2
5
8
3
6
9
.
-
0
Axis 1
Axis 2
Axis 3
Axis 4
JOG
MANU PROG .
1:
2:
3:
4:
21
2.34 mm
nUcon
56
3-.35 mm6
nect
LA
HOME
Steactionlec
MOV E
.345 Deg
ed
UP
VALID
MODIFY
QUITYESQUITQUIT
VALID
1
4
7
2
5
8
3
6
9
.
-
0
Axis 1
Axis 2
Axis 3
Axis 4
JOG
MODIFY
UP
MODIFYAxis Setup
1
4
7
2
5
8
3
6
9
.
-
0
Axis 1
Axis 2
Axis 3
Axis 4
JOG
MANU PROG .
1:
2:
3:
4:
21
2.34 mm
nUcon
56
3-.35 mm6
nect
LA
HOME
Steactionlec
MOV E
.345 Deg
ed
UP
VALID
MODIFY
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com