NewSonic SonoDur2 Issue 04 09/2016 Page 19
4.4 Operating Time
The operating time decisively depends on the selected mode, ambient temperature, maintenance
condition and battery’s age. Therefore, only a typical operating time can be specified, which however
cannot be guaranteed for the stated reasons.
Operation time for SonoDur2 is >8 hours under normal operating conditions and up to 6 hours
continuous operating time.
Once the error message "Main Battery Low" appears or the battery indicator flashes red, the current
series of measurements should be completed and the SonoDur2 must be connected with the SONO-
NG plug-in power supply for charging or the battery pack must be exchanged.
4.4.1 Querying of Battery Capacity
The battery status can be queried at any time by touching the status bar and then touching the
battery symbol. By acknowledging the OK button or by pressing the upper left button, you will be
returned to the program.
Your Complete Source for
Testing Equipment. Since 1969!
www.BergEng.com
Berg Engineering & Sales Company, Inc.
Tel 847-577-3980
info@bergeng.com
To Next Page
Loading...
