NewSonic SonoDur2 Issue 04 09/2016 Page 72
12 Accessories
12.1 SONO-PM-4, Prisms Attachment Kit for Motorized Probes
This manual describes the use of the prism attachments for motorized probes of the SonoDur2
product family. The operation of the motorized probes is described in the SonoDur2 instruction
manual. Knowledge about such devices is required.
12.1.1 Technical Data and Components
The prisms attachment kit consists of a special probe base with screw thread, featured with four
levels to enable the best possible adaptation to curved surfaces as well as three pre-fitted plates and
one plate for flat surfaces that can be screwed onto the special probe foot.
Figure 12.1
Figure 12.2
SONO-PM-4, Order Number: 11209
Special probe base with screw-in sleeve and switching
sleeve
Probe plate for small cylindrical parts, Ø 36mm
Probe plate with Ø 70mm
Probe plate with milled edges Ø 50, width 36mm
Probe plate for flat surfaces, Ø 36mm
Your Complete Source for
Testing Equipment. Since 1969!
www.BergEng.com
Berg Engineering & Sales Company, Inc.
Tel 847-577-3980
info@bergeng.com
To Next Page
Loading...