NewSonic SonoDur2 Issue 04 09/2016 Page 47
These original measurement data is important for the verification of data security and
traceability of test results for potential audits.
7.11.4 USB Cable
Connect the SonoDur2 device to the PC via USB cable and turn on the device. The driver software will
now be automatically installed (this may take a while) on your PC and the appropriate
communication program starts automatically.
WIN XP: The system folder "Windows Mobile" can now be opened via "My Computer" and like with
any other external storage device, data can be read or folders may be created and deleted.
WIN 7: Windows Mobile will be automatically started and the SonoDur2 device will be configured.
The "Windows Mobile Device Center" will open up and the setup of the SonoDur2 device is provided
however, this is not necessarily required and therefore can be interrupted (please also see section
10.6.2, “Connecting SonoDur2 to your Computer”). Only the internal memory of the SonoDur2 device
can be opened under "File Management" and the data processing can now take place with any
external storage device.
All stored data can now be completely transferred from the SonoDur2 device to the PC in one go and
the text files, for instance, can be converted into Excel files. For this purpose, Excel gets started in
order to import the desired text document.
7.11.5 Bluetooth
Please see Section “Bluetooth Setup“, page 45 in order to install the Bluetooth interface.
Activate the Bluetooth function on the SonoDur2 screen (SonoDur2 program must be closed for this
purpose) by tapping on the appropriate symbol on the bottom right hand side. The Bluetooth menu
will be started and Bluetooth can be turned by tapping on the tick and make it recognizable to other
devices.
Select the relevant file for data transmission and select the “Transfer File” menu function on the
bottom right hand corner of the screen. At this point, the Bluetooth interface of the PC will be
searched and released for data transfer by tapping on the SonoDur2 screen – please also see section
10.6.4, page 60.
The data transfer must be approved with "Yes" on the PC. The result of the data transfer will then be
displayed in the so-called “Inbox” of the USB device and can be stored on a PC for further processing
via Excel, Word, etc.
Please note:
The PC must be equipped with a Bluetooth interface or featured with a USB Bluetooth
adapter (Please see section 11.1, “Scope of Delivery and Accessories”).
Your Complete Source for
Testing Equipment. Since 1969!
www.BergEng.com
Berg Engineering & Sales Company, Inc.
Tel 847-577-3980
info@bergeng.com
To Next Page
Loading...
