NewSonic SonoDur2 Issue 04 09/2016 Page 48
In order to ensure faultless installation, please follow the instructions on the individual
device menus.
It is only possible to transfer individual files. In order to perform a complete transfer of
records, it is required to connect a USB cable.
Data cannot be collected from the SonoDur2 device by means of the PC, i.e. the whole data
processing procedure must take place inside the device itself, if no USB interface is used.
In order to avoid unnecessary energy consumption, it is recommended to deactivate the
Bluetooth interface during normal test operation.
7.11.6 WLAN
Please contact your network administrator or your local service provider in terms of WLAN
connections.
7.11.7 Data Card Operation
The SonoDur2 saves all measurement and adjustment data on an exchangeable micro SD card. The
advantage is that in the (unlikely) event of a device defect, measurement and adjustment data will
remain safe with very high probability and can be easily transferred from the SD card to a PC. In this
event, please contact our customer service.
Your Complete Source for
Testing Equipment. Since 1969!
www.BergEng.com
Berg Engineering & Sales Company, Inc.
Tel 847-577-3980
info@bergeng.com
To Next Page
Loading...
