NewSonic SonoDur2 Issue 04 09/2016 Page 55
10.6 Installing Interfaces and Drivers
Attention:
You should have basic knowledge of computers and working with the Microsoft file explorer.
Improper use can cause data loss and/or damage to system files, resulting in a non-functional device!
The SonoDur2 device features 3 data transmission interfaces, namely USB, Bluetooth and WLAN. In
the following, the installation for operating systems on the basis of Windows XP and WIN 7 will be
explained. During the installations, please follow the setup instructions displayed on your screen. In
case you are unsure or use other systems, please contact your network administrator.
When using the Bluetooth and WLAN radio links, please observe the following safety guidelines:
Keep a distance of at least 30 cm to any medical equipment or pacemakers to avoid
interferences with these devices and thus, cause a potential danger to those individuals!
Hearing aids can produce a disagreeable buzzing or humming.
Please turn off your wireless components as a precautionary measure before boarding any
airplane or when you are driving a car.
Please also turn off your wireless components, if you are in the vicinity of inflammable gases
or in explosion-hazardous environments.
10.6.1 Preparedness
In order to exchange data with a PC, you must have the software ActiveSync (Windows XP) or
Windows Mobile Device Center (Vista, Windows 7) installed on your PC. The corresponding program
is already installed on the SonoDur2 device.
For computers with Windows7 and higher the Microsoft Mobile Device Center is normally already
installed. If your computer uses Windows7, you can proceed with section 10.6.2.
Press -> Start -> All Programs and look for Microsoft ActiveSync or Microsoft Mobile Device Center.
If none of these programs exist, you have to install it.
In order to find out which operating system you are using, press -> Start, ->right mouse click on My
Computer and then click on -> Properties. You will find the appropriate driver for your operating
system on the SonoDur2 system CD. Double-click on the appropriate installation file and follow the
instructions.
Your Complete Source for
Testing Equipment. Since 1969!
www.BergEng.com
Berg Engineering & Sales Company, Inc.
Tel 847-577-3980
info@bergeng.com
To Next Page
Loading...
