SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS
Figure 95 - IP encap-decap Settings
VLAN Forwarding Description
Add-drop The VLAN tag is dropped and replaced by
PID/ISI/AirMAC addressing.
Keep The VLAN tag is kept in addition to the
PID/ISI/AirMAC addressing.
VLAN type id: Description
VLAN type id This is used to filter on the VLAN tag and identify
which protocol is used. This is the indication of the
Ether type, refer to section 9.5.2.
The default value is 8100.
Change this setting manually when needed.
To Next Page
Loading...
