Newtec EL170 - EL470 IP Satellite Modem Back Panel

Physical Description
User Manual for EL170/970/470 IP Satellite Modulator/
Demodulator/Modem
version 4.2
54
SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS
4.2.5 EL470 IP Satellite Modem Back Panel
The figure below shows the possible connections on the modem. The back panel
connections available depend on the specific hardware configuration of your device
and will differ from the back panels in figures below. Only a subset of the shown
connections will be available on your device.
Figure 24 – EL470 IP Satellite Modem Back Panel
The sub back panels used per ordering option is listed in the following table.
We refer to the section Options on page ‘xvi‘ for ordering
information.
We refer to section 4.2.2 for the description of the different sub
back panels.
4.2.5.1 Modulator Sub Back Panel Options
Option Back Panel Combination
Not Used Connectors
BP-<number>/<connector>,<connector>
Default BP 01 BP 01/2
AA-02 BP 01
BP 02
BP 01/2,3,4
BP 02/4
AA-03 BP 01
BP 07
BP 01/2
BP 07/5
AA-12 BP 01
BP 06
BP 01/2
AA-13 BP 01
BP 06
BP 01/2
AA 18 BP 01 BP 01/2