SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS
The following procedure is performed in the network.
Time Hub Remote site(s)
Start The hub transmits on:
frequency 1, symbol rate 1.
The remote site is locked on frequency 1, symbol rate 1.
Preconfiguration The hub transmits on
frequency 1, symbol rate 1.
The remote site is locked on frequency 1, symbol rate 1.
Preconfigure the remote site as follows:
• Backup receive frequency 1: Frequency 2, symbol rate 2;
• Backup receive frequency 2: Frequency 1, symbol rate 1.
• Enable the setting carrier switching Enable.
Carrier switch The hub transmits on:
frequency 2, symbol rate 2.
1. The remote site looses lock;
2. The remote site tries to connect with Backup receive
frequency 1 (Frequency2, symbol rate 2).
The remote site is locked on frequency 2, symbol rate2.
The network is
stable.
The hub transmits on:
frequency 2, symbol rate 2.
1. The remote site is locked on frequency 2, symbol rate2.
2. Disable the setting carrier switching Enable.
3. Save the configuration.
To Next Page
Loading...
