SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS
The icons behind the configuration names support to:
• Save the current configuration to persistent memory (
).
If a configuration is not saved to persistent memory it will be lost
when the device powers down.
• Load a stored configuration ( ).
•
The Import and Export buttons below the list of different configurations support to:
• Import configurations from a “.cfg” file stored on the local PC. Refer to section
0;
• Export all saved configurations in a “.cfg” file to a local PC.
It is possible to edit the name of an existing configuration by double clicking on the
configuration name that must be renamed.
Example:
Suppose to save the current configuration of the device under the third
configuration slot and name it: Newtec_example.
Click the Configuration tab;
Click the Save button next to the third configuration slot;
Double-click the Name field of the third configuration slot. You can now enter a
new name for the configuration;
Type Newtec_example and click outside the text field.
6.3.4.3 Macro Tab
Figure 44 - Custom Function Macro Tab
To Next Page
Loading...
