Full Color Card Printer PR-C101/C101M
12
5 Click [Print].
• Printing starts.
• Cards are pulled into the printer and the READY
Indicator blinks.
[Now Printing..] appears on the LCD Panel.
Removing Cards
The factory default is for printed cards to be ejected from Card Ejection Slot 1.
1 Pull out Card Ejection Slot 1 Tray.
• The Card Ejection Slot 1 tray can be pulled out in two
directions. (See the illustration to the right)
Note
z The Card Ejection Slot 1 tray has a maximum capacity of approximately 30 cards.
If the cards printed exceed the maximum capacity of the tray, it will ejected from the
slit of the tray.
Before the tray filled to capacity, making it empty is recommended.
z The factory default is for both correctly printed cards and cards with errors to be
ejected from Card Ejection Slot 1.
You can easily sort cards with errors by attaching a Card Stacker and setting cards
with errors to be ejected to Card Ejection Slot 2.
→See "Switching the Card Ejection Slot" on page 21 for information about switching the card ejection slot
and attaching the Card Stacker.
PR-C101_C101M_E.book Page 12 Monday, August 27, 2007 11:16 AM
To Next Page
Loading...
Need help?
General
