Full Color Card Printer PR-C101/C101M
32
Cleaning
The rollers need to be cleaned to maintain good print quality.
This section explains which rollers need to be cleaned and how to clean them.
Before Cleaning
Note the following cautions when cleaning the rollers.
z Do not clean the rollers near an open flame.
z Remove any cards that are inside the printer.
z After cleaning the rollers, do not use the printer until the rollers get dry (for at
least five minutes).
z Do not touch the rollers with your bare hands.
Cleaning with a Cleaning Card
Use the Cleaning Card (provided) to clean the Card Transport Roller if cards do not feed
smoothly.
We recommend cleaning the rollers after printing about 1,000 cards.
→See "Cleaning Cards" on page 43 for details about which Cleaning Cards you can use.
Note
z The [Card Count] and [Total Count] functions make it easy to keep track of how many
cards are printed.
→See "Counting the Number of Cards that Are Printed" on page 20 for details about the [Card Count]
function.
→See "Displaying the Total Number of Sides that Are Printed" on page 20 for details about the [Total Count]
function.
z Cleaning Cards can only be used once and cannot be reused. Use a new
Cleaning Card every time you clean the rollers.
1 Turn on the power and switch from
Normal Mode to User Mode.
→See "Switching to User Mode" on page 16 for details on
how to switch to User Mode.
User Mode >>
MENU
Ready to Print
CLEAR
(3 Sec.)
EXE
[User Mode]
PR-C101_C101M_E.book Page 32 Monday, August 27, 2007 11:16 AM
To Next Page
Loading...
Need help?
General
