Full Color Card Printer PR-C101/C101M
40
When Cards are Not Printed Correctly...
If missing or incorrect colors are printed on a card or cards are incorrectly printed, resolve the
problem according to the following instructions.
Problem Cause and solution
There are missing or
incorrect colors in certain
sections.
Dirt is present.
Is there dirt on the card surface?
⇒Do not use dirty cards.
⇒Avoid using the printer in locations with excessive dust or dirt.
⇒Clean the Cleaning Roller.
→See "Cleaning the Cleaning Roller" on page 34 for instructions on cleaning the
Cleaning Roller.
There are incorrect colors
within an indefinite range.
Is there oil content attached on the card surface?
⇒Do not touch the printing side of the card.
Are you using incompatible cards?
⇒Use only recommended cards.
→See "Cards" on page 43 for details about which cards you can use.
White cards (unprinted
cards) are output.
Only color image data was received with the Overcoating Black Ink
Ribbon or Black Ink Ribbon loaded.
⇒Use the Overcoating Color Ink Ribbon when printing in color.
→See "Changing the Ink Ribbon Cartridge" on page 13 for details about
changing the Ink Ribbon Cartridge.
Fine lines are not printed. Contact your reseller.
PR-C101_C101M_E.book Page 40 Monday, August 27, 2007 11:16 AM
To Next Page
Loading...
Need help?
General
