Full Color Card Printer PR-C101/C101M
28
Setting the Printer to Reprint a Card if an Error Occurs
You can change the settings so that cards being printed when an error occurs are automatically
reprinted after the error is fixed.
This is useful to prevent omissions due to errors when printing cards in a series, such as
employee IDs.
Note
z You can also change the setting by using the printer driver. (→See "Opening the
Printer Driver Settings Screen" on page 47.)
1 Switch from Normal Mode to User
Mode.
→See "Switching to User Mode" on page 16 for details on
how to switch to User Mode.
2 Press the Menu Key until [Printer
Setup >>] appears, and then press the
EXE Key.
3 Press the Menu Key until [Retry Print]
appears, and then press the EXE Key.
• Pressing the EXE Key switches between [ON] and
[OFF].
• Set to [ON] to reprint cards after an error or set it to
[OFF] to not reprint the cards.
Note
z The factory default setting is [OFF].
z If the printer is restarted to fix the error, the card that was being printed during the
error is not automatically reprinted.
User Mode >>
MENU
Ready to Print
CLEAR
(3 Sec.)
EXE
[User Mode]
Printer Setup >>
EXE
[Printer Setup]
[User Mode]
MENU
MENU
Retry Print ON
MENU
MENU
[Printer Setup]
Retry Print OFF
EXE
PR-C101_C101M_E.book Page 28 Monday, August 27, 2007 11:16 AM
To Next Page
Loading...
Need help?
General
