Getting the Most Out of Your Printer
27
Turning the Error Alarm On or Off
The initial setting is for the buzzer to sound when an error occurs.
You can set the buzzer so that it does not sound.
Note
z You can also change the setting by using the printer driver. (→See "Opening the
Printer Driver Settings Screen" on page 47.)
1 Switch from Normal Mode to User
Mode.
→See "Switching to User Mode" on page 16 for details on
how to switch to User Mode.
2 Press the Menu Key until [Printer
Setup >>] appears, and then press the
EXE Key.
3 Press the Menu Key until [Buzzer]
appears, and then press the EXE Key to
change the settings.
• Pressing the EXE Key switches between [ON] and
[OFF].
• Set it to [ON] to sound the buzzer or [OFF] to turn the
buzzer off.
User Mode >>
MENU
Ready to Print
CLEAR
(3 Sec.)
EXE
[User Mode]
Printer Setup >>
EXE
[Printer Setup]
[User Mode]
MENU
MENU
Buzzer OFF
MENU
MENU
[Printer Setup]
Buzzer ON
EXE
PR-C101_C101M_E.book Page 27 Monday, August 27, 2007 11:16 AM
To Next Page
Loading...
Need help?
General
