Full Color Card Printer PR-C101/C101M
4
Rear of the Printer
*1 When using CR-80 cards (size: 3.375" x 2.125" (86 mm x 54 mm), thickness: 0.03" (0.76 mm)).
a Power Switch
Turns the power on and off.
→See "Turning On and Off the Printer" on page 8 for
instructions on turning the power on and off.
b Card Ejection Slot 2
Ejects correctly printed cards and cards with
errors.
A maximum of 50
*1
cards can be stacked by
attaching the provided Card Stacker.
You can select between Card Ejection Slot 1
and 2 for card ejection.
→See "Switching the Card Ejection Slot" on page 21
for information about switching the card ejection slot.
c Security Cable Slot
Use the Security Cable Slot to prevent theft of
the printer.
→See "Preventing Theft of the Printer (Security Cable
Slot)" on page 31 for instructions on using the Security
Cable Slot.
d Power Cable Port
Used to connect the provided Power Cable.
→See the "Easy Setup Guide" for instructions on
connecting the cable.
e Port for Enhancing Function
Used for enhancing a function.
f USB Port
Used for connecting to a computer with the
provided USB cable.
→See the "Easy Setup Guide" for instructions on
connecting the cable.
a
f
e
b
c
d
PR-C101_C101M_E.book Page 4 Monday, August 27, 2007 11:16 AM
To Next Page
Loading...
Need help?
General
