Full Color Card Printer PR-C101/C101M
14
2 Lift the Ink Ribbon Cartridge Securing
Lever and remove the used Ink Ribbon
Cartridge.
• Raise the lever's handle and after pulling it towards
you, rotate the lever to the left.
• After pressing the lever in, remove the Ink Ribbon
Cartridge.
3 Remove the Cleaning Tape Protector
and the fixing tape from the new Ink
Ribbon Cartridge.
• Remove the new Ink Ribbon Cartridge from the box
and the bag, and then remove the Cleaning Tape
Protector from the Cleaning Assist Roller and the Ink
Ribbon Fixing Tape.
4 Load the new Ink Ribbon Cartridge.
• Fully insert the Ink Ribbon Cartridge.
• Do not insert the cartridge to the printer with ink ribbon
slacked.
5 Lower the Ink Ribbon Cartridge
Securing Lever and close the Front
Cover.
• Pull the lever towards you and rotate it to the right.
With the lever lowered, press it in and fold in the
handle.
6 Press the CLEAR Key.
• Press the CLEAR Key if [Push CLEAR Key] appears
on the screen and then [Ready to Print] appears.
• Clear an error first if the error message appears on the
screen and then press the CLEAR Key.
→See "When an Error Message Appears..." on
page 36.
PR-C101_C101M_E.book Page 14 Monday, August 27, 2007 11:16 AM
To Next Page
Loading...
Need help?
General
