Nisca PR-C101 - Preventing Theft and Unauthorized Usage; Preventing Theft of the Printer (Security Cable Slot); How to Store Cards (Removing the Card Case)

Getting the Most Out of Your Printer
31
1 Switch from Normal Mode to User
Mode.
→See "Switching to User Mode" on page 16 for details on
how to switch to User Mode.
2 Press the Menu Key until [Setup
Reset[C+E]] appears, and then press
the EXE Key and the CLEAR Key at the
same time.
Preventing Theft and Unauthorized Usage
 Preventing Theft of the Printer (Security Cable Slot)
You can prevent theft of the printer by locking it with a wire cable.
Use a wire cable that fits the Security Cable Slot
(0.12" x 0.28" (3.00 mm x 7.00 mm)) to lock up
the printer.
Note
z Use a commercial security cable.
 How to Store Cards (Removing the Card Case)
You can prevent unauthorized use of the cards by removing the Card Case and locking it in
a safe or other secure location.
1 Pull the Card Case as indicated by
arrow in the illustration.
• Grip the Card Case by the embossing on its sides and
pull it forward and down.
• When you hear a click remove the Card Case.
User Mode >>
MENU
Ready to Print
CLEAR
(3 Sec.)
EXE
[User Mode]
Setup Reset[C+E]
[User Mode]
MENU
MENU
PR-C101_C101M_E.book Page 31 Monday, August 27, 2007 11:16 AM