Nokia 7705 SAR-W Series - Page 238

MPLS and RSVP-TE
238
MPLS Guide
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com
3HE 18686 AAAB TQZZA
lsp
Syntax lsp [lsp-name] [status {up | down}] [from ip-address | to ip-address] [detail] [auto-lsp {all |
mesh-p2p | one-hop-p2p}]
lsp {transit | terminate} [status {up | down}] [from ip-address | to ip-address | lsp-name
name] [detail]
lsp count
lsp [lsp-name] activepath [auto-lsp {all | mesh-p2p | one-hop-p2p}]
lsp [lsp-name] path [path-name] [status {up | down}] [detail
] [auto-lsp {all | mesh-p2p |
one-hop-p2p}]
lsp [lsp-name] path [path-name] mbb [auto-lsp {all | mesh-p2p | one-hop-p2p}]
Context show>router>mpls
Description This command displays LSP details.
Parameters lsp-name — specifies the name of the LSP used in the path
status up — displays an LSP that is operationally up
status down — displays an LSP that is operationally down
from ip-address — displays the IP address of the ingress router for the LSP
to ip-address — displays the IP address of the egress router for the LSP
transit — displays the LSPs that transit the router
terminate — displays the LSPs that terminate at the router
name — displays the IP address of the named LSP
count — displays the total number of LSPs
activepath — displays the present path being used to forward traffic
path-name — specifies the name of the path carrying the LSP
mbb — displays make-before-break (MBB) information
detail — displays detailed information
auto-lsp {all | mesh-p2p | one-hop-p2p} — specifies the type of auto LSP or all auto
LSPs
Output The following outputs are examples of MPLS LSP information:
• MPLS LSP (Output Example, Table 12)
• MPLS LSP Detail (Output Example, Table 13)
• MPLS LSP Path Detail (Output Example, Table 14)
• MPLS LSP Path MBB (Output Example
, Table 15)
• MPLS Auto LSP (Output Example, Table 16)