ACCESS GATEWAY
104 System Administration
2. If you want to enable the billing records “mirroring” functionality for credit card
transactions, click on the check box for
Enable Bill Record Mirroring.
3.
Enter the property identification code in the Property ID field.
4. Enter the communication parameters for the primary server that is to be used for mirroring,
including:
Primary IP
URL
Secret Key
5. Repeat Step 4 for the secondary server (if any) and all carbon copy servers.
6. Define the “fail-safe” provisions, including:
Retransmit Method – Alternate, or do not alternate.
The Access Gateway and the “mirror” servers must use the same secret key.
To Next Page
Loading...
