Nomadix Access Gateway - Deleting Port-Location Assignments by Location {Delete by Location; Deleting Port-Location Assignments by Port {Delete by Port

ACCESS GATEWAY
208 System Administration
Deleting Port-Location Assignments by Location {Delete by Location}
This procedure shows you how to delete a port-location assignment, based on its location. The
Access Gateway prompts you to confirm this action before deleting the requested port-
location.
1. From the Web Management Interface, click on Port-Location, then Delete by Location.
The Delete Port-Location Assignments by Location screen appears:
2. In the Location field, enter the location of the port-location assignment you want to delete.
3. Click on the Delete button to delete the specified port-location assignment, or click on the
Reset button if you want to reset the “location” value to its blank state.
Deleting Port-Location Assignments by Port {Delete by Port}
This procedure shows you how to delete a port-location assignment, based on its port. The
Access Gateway prompts you to confirm this action before deleting the requested port-
location.
If you are unsure which port-locations are currently mapped to the system, you
can view a list at “Displaying the Port-Location Mappings {List}” on page 215.
Locations are case-sensitive.
If you are unsure which port-locations are currently mapped to the system, you
can view a list at “Displaying the Port-Location Mappings {List}” on page 215.