ACCESS GATEWAY
116 System Administration
14. If required, make this an IP Upsell Pool and/or the Default Pool by checking the
appropriate boxes.
15. Optional, if the gateway router for the DHCP Pool is other than that of the DHCP Server
IP, select
Specify and enter the IP address of the gateway router of choice.
16. When finished establishing your DHCP Pools, click on the Back to Main DHCP
Configuration Page
to return to the previous page.
17. You must now reboot the system for the new settings to take effect. Click the check box for
Reboot after changes are saved? then click on the Submit button to save your changes
and reboot the system, or click on the
Reset button if you want to reset all the values to
their previous state.
The existing lease pool and lease table are deleted and the Access Gateway reboots. The
Access Gateway can issue IP addresses to any DHCP enabled subscriber who enters the
network.
Enabling DNSSEC Support
DNSSEC support adds authentication and integrity capability to DNS systems. The DNSSEC
feature in the NSE allows DNSSEC queries and responses to traverse the NSE between
subscribers and the NSE’s configured DNS servers. The NSE itself does not participate in
DNSSEC trust relationships with subscribers. Reboot is not required.
Use the following procedure to set the DNS configuration options.
1. From the Web Management Interface, click on Configuration, then DNS. The Domain
Name System (DNS) Settings screen appears:
Do not allow pools to overlap.
To Next Page
Loading...
