Nomadix Access Gateway - Blocking a Subscriber Interface {Subscriber Interfaces

ACCESS GATEWAY
System Administration 285
1. From the Web Management Interface, click on System, then Static Port-Mapping Delete.
The Delete Static Port-Mapping Entries screen appears:
2. Enter the External IP Address and/or the External Port of the item you want to delete.
3. Click on the Delete button to delete the static port, or click on the Reset button to reset
your changes to their previous state.
For more information about Static Port-Mapping, see also:
 “Displaying the Static Port Mapping Table {Static Port-Mapping}” on page 200
 “Adding Static Ports {Static Port-Mapping Add}” on page 283
Blocking a Subscriber Interface {Subscriber Interfaces}
The Access Gateway allows System Administrators to block subscriber interfaces.