ACCESS GATEWAY
280 System Administration
Rebooting the System {Reboot}
This procedure shows you how to reboot the Access Gateway.
1. From the Web Management Interface, click on System, then Reboot. The Reboot Device
screen appears:
2. Click on OK to reboot the operating system.
Routing Tables {Routing}
This command allows you to configure static routes and pick the WAN interface for a specific
destination network. The display provides information on network routes and their system
connections. You can also add or delete routes from this screen.
To use this feature, WAN Load Balancing must be enabled. See “Load Balancing” on
page 131.
The “reboot” procedure outlined on this page allows you to decide when to
reboot (if you are making multiple changes to different menu functions and you
want to reboot just one time after completing all your changes).
To Next Page
Loading...
