ACCESS GATEWAY
108 System Administration
XML
Subscriber Administration menu
Subscriber Interface menu
Assigning a User to Class-Based Queueing Using Radius
Subscribers can be assigned to a specific class/sub-class using Radius VSA. Subscribers with
no class membership are assigned a priority of 8.
ATTRIBUTE Nomadix-Bw-Class-Name 27 string
For example, when a subscriber logs in and this attribute is defined as follows, the subscriber
gets assigned to the class priority1.Subclass.
Nomadix-Bw-Class-Name = "priority1.Sub-class"
Assigning a user to a class using XML
The CLASS_NAME element has been added to the USER_ADD and USER_PAYMENT XML
commands. These are covered in the 8.4 XML DTD documentation, available from
www.nomadix.com/support.
Assigning a User to a Class using the Subscriber Administration menu
The procedures for Adding Subscriber Profiles (
Subscriber Administration > Add) support
adding a subscriber, device, or group account profile to a class. See “Adding Subscriber
Profiles {Add}” on page 216.
Assigning a User to a Class Using Bill Plans (Subscriber Interface menu)
You can add a user to a class while setting up a billing plan. See “Setting Up a “Normal”
Billing Plan” on page 235.
Clustering {Clustering}
NSE Clustering provides the ability to cluster multiple gateways on one network segment. For
more information about this feature, including description, limitations, and troubleshooting
information, see “Multiple Unit Clustering” on page 29.
To enable NSE Clustering:
1. Click Configuration > Clustering and click Enable.
To Next Page
Loading...
