ACCESS GATEWAY
System Administration 209
1. From the Web Management Interface, click on Port-Location, then Delete by Port. The
Delete Port-Location Assignments by Port screen appears:
2. In the Port field, enter the port of the assignment you want to delete.
3. Click on the Delete button to delete the specified port-location assignment, or click on the
Reset button if you want to reset the “port” value to its blank state.
Exporting Port-Location Assignments {Export}
This procedure shows you how to export your current port-location assignments to the
“location.txt” file. The location.txt file is stored in: /flash/location.txt (resident in the Access
Gateway’s flash memory).
1. From the Web Management Interface, click on Port-Location, then Export. The Export
Port-Location Assignments screen appears:
2. Click on the Export button to export port-location assignment to the /flash/location.txt.
file.
The “port” is the VLAN ID (when using 802.1Q 2-way).
Exporting your current port-location assignments to the Access Gateway’s flash
memory will overwrite the existing location.txt file.
To Next Page
Loading...
