ACCESS GATEWAY
System Administration 119
1. From the Web Management Interface, click Configuration, then Dynamic DNS. The
Dynamic DNS Configuration screen appears:
2. Check the Enable checkbox to enable Dynamic DNS (DDNS) functionality. The default
setting is disabled.
3. Enter the Provider Info:
Select the provider protocol from the Protocol menu. Currently, only dyndns.org
and dyndns.org (secure) are supported. The default setting is dyndns.org (secure).
In the Server field, enter the server name to which the client sends updates to the
DDNS server.
Select the port number for the server from the Port menu.
4. Enter the Account Information:
Enter the host name, which is the DDNS name that is mapped to the client IP address,
in the
Hostname field. DDNS mapping is configured on the DynDNS.org account.
Enter the user name for the DDNS server account in the Username field.
Enter the password name for the DDNS server account in the Password field.
To Next Page
Loading...
