Nortel BCM50a - Figure 56 Menu 21.1- Filter Set Configuration

Chapter 11 Filter configuration 121
BCM50a Integrated Router Configuration — Advanced
Figure 56 Menu 21.1– Filter Set Configuration
3 Select the filter set you wish to configure (1-12) and press [ENTER].
4 Enter a descriptive name or comment in the Edit Comments field and press
[ENTER].
5 Press [ENTER] at the message “Press ENTER to confirm” to open Menu
21.1.1 - Filter Rules Summary.
The screen shown in Figure 57 shows the summary of the existing rules in the
filter set. Table 23 and Table 24 contain a brief description of the abbreviations
used in the previous menus.
Menu 21.1 - Filter Set Configuration
Filter Filter
Set # Comments Set # Comments
------ ----------------- ------ -----------------
1 _______________ 7 _______________
2 _______________ 8 _______________
3 _______________ 9 _______________
4 _______________ 10 _______________
5 _______________ 11 _______________
6 _______________ 12 _______________
Enter Filter Set Number to Configure= 0
Edit Comments= N/A
Press ENTER to Confirm or ESC to Cancel: