Nortel BCM50a - Nortel BCM50 DHCP server options; BCM50 DHCP server settings

Appendix I Enhanced DHCP option commands 283
BCM50a Integrated Router Configuration — Advanced
The following example sets the BCM50a Integrated Router to assign an IP address of
11.12.13.10 to the Nortel BCM50.
ip dhcp <interface> server m50ipreserve ip 11.12.13.10
Nortel BCM50 DHCP server options
Use these commands to add site-specific options to the DHCP server’s offer messages that
it sends to the BCM50.
BCM50 DHCP server settings
Syntax:
ip dhcp <interface> server m50dhcpmode [0:disable | 1:IP phones only | 2:All
devices | 3:automatic] [<range start>-<range end>]
where:
<interface>
Specify an interface on the device. Currently you can use this
command with the LAN interface (enif0).