Nortel BCM50a - Figure 8 Menu 1.1 - Configure Dynamic DNS; Table 5 Configure Dynamic DNS Menu Fields

Chapter 2 SMT menu 1 - general setup 49
BCM50a Integrated Router Configuration — Advanced
Figure 8 Menu 1.1 – Configure Dynamic DNS
Follow the instructions in Table 5 to configure Dynamic DNS parameters.
Menu 1.1 - Configure Dynamic DNS
Service Provider= WWW.DynDNS.ORG
Active= No
DDNS Type= DynamicDNS
Host Name 1=
Host Name 2=
Host Name 3=
Username=
Password= ********
Enable Wildcard Option= No
Enable Off Line Option= N/A
IP Address Update Policy:
DDNS Server Auto Detect IP Address= No
Use Specified IP Address= No
Use IP Address= N/A
Press ENTER to confirm or ESC to cancel:
Table 5 Configure dynamic DNS menu fields
Field Description Example
Service Provider This is the name of your Dynamic DNS service
provider.
www.dyndns.org
(default)
Active Press [SPACE BAR] to select Yes and then press
[ENTER] to make dynamic DNS active.
Yes
DDNS Type Press [SPACE BAR] and then [ENTER] to select
DynamicDNS if you have a dynamic IP addresses.
Select StaticDNS if you have a static IP
addresses.
Select CustomDNS to have dyns.org provide DNS
service for a domain name that you already have
from a source other than dyndns.org.
DynamicDNS
(default)
Host1-3 Enter your host names in the fields provided. You
can specify up to two host names separated by a
comma in each field.
me.dyndns.org
EMAIL Enter your e-mail address. mail@mailserver
User Enter your username.
Password Enter the password assigned to you.