146 Chapter 14 System information and diagnosis
N0115791
Figure 70 Menu 24 – System Maintenance
System Status
The first selection, System Status, gives you information on the version of your
system firmware and the status and statistics of the ports, as shown in the next
figure. System Status is a tool that can be used to monitor your BCM50a
Integrated Router. Specifically, it gives you information on your system firmware
version, number of packets sent, and number of packets received.
To get to the System Status:
1 Enter number 24 to go to Menu 24 - System Maintenance.
2 In this menu, enter 1 to open System Maintenance - Status.
Menu 24 - System Maintenance
1. System Status
2. System Information and Console Port Speed
3. Log and Trace
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Upload Firmware
8. Command Interpreter Mode
9. Call Control
10. Time and Date Setting
11. Remote Management Setup
Enter Menu Selection Number:
To Next Page
Loading...
